TcN-PM tool grinding machine
building elements:
a. Rough and finishing knives of butt end reducers with the angle of cutting edge of 300 deg
b. Radial knives for long groove cutting with the angle of cutting edge of 450 deg for log diameters from 180 to 320 mm.
c. Cutters with the angle of cutting edge of 450 deg and length up to 180 mm.
* Other angles - upon request
For more information on tool grinding machine refer to Equipment Certificate.
You can also download a video presentation (20 Mb) or watch it online (see below)
| № | Parameter | Value |
| 1 | Maximum grindstone diameter, mm | 125 |
| 2 | Maximum radial velocity of the grindstone, m/s |
20 |
| 3 | Dimensions, mm, no more than |
462 575 695 |
| 4 | Weight, kg, no more than | 96 |
| 5 | Service norm, persons | 1 |
Electric Specification |
||
| 6 | Current type | alternating 3-phase |
| 7 | Rated frequency, Hz | 50 |
| 8 | Rated voltage, V |
380 380 |
| 9 | Number of electric motors |
1 |
| 10 | Grindstone drive motor: - power, kW - synchronous velocity, rpm |
0,55 2850 |
 |
 |
Additional information
TcN-PM tool grinding machine is designed for grinding of tools used in equipment producing house building elements:
* Rough and finishing knives of butt end reducers with the angle of cutting edge of 300 deg
* Radial knives for long groove cutting with the angle of cutting edge of 450 deg for log diameters from 180 to 320 mm.
* Cutters with the angle of cutting edge of 450 deg and length up to 180 mm (for integrated lathes e.g. 668C)
1. Warranty
The manufacturer provides a 1 year warranty for all equipment
2. Tools
All machines are equipped with a 125 mm grindstone.
3. Machine manufacture time
Machine manufacture time is within 1-2 weeks.
4. Payment terms
50% advance payment and 50% when the equipment is ready for shipment. 3% discount may be granted for 100% advance payment.
5. Parts list
| Position in the picture | Number | Name |
| 1 | TcN-PM 010.000 | Grinding head |
| 2 | TcN-PM 020.000 | Rotation mechanism |
| 3 | TcN-PM 030.000 | Microfeed |
| 4 | TcN-PM 040.000 | Frame |
| 5 | TcN-PM 050.000 | Radial knife grinding tool |
| 6 | TcLB 080.000 | Electric motor |
6. Delivery set
Number |
Name |
Qty |
1 |
2 |
3 |
| TcN-PM 000.000 | Tool grinding machine. TcN-PM make | 1 |
Tools |
||
| Grindstone GOST 2424-83 | ||
| 25А.CC.125-63-32.25.СМ | 1 |
|
| Documents | ||
| TcN-PM 000.000.RE | Tool grinding machine. TcN-PM make. User manual | 1 |
7. Machine diagram
General drawing of the machine and its units see in Fig. 1a and 1b.
