675C integrated lathe

675C profiler is designed for processing of rounded logs matched three-edged round cants of various sections.

Dimensions of a finished product with allowance for further processing (shrinkage) and tolerances are determined by the customer when ordering.

The price of 675C lathe includes one outfit for one type of lumber. Outfits for other above-listed lumber types are to be ordered additionally.

The log undergoes only one processing operations: smoothing/cutting

675C lathe Specification

Blank dimensions, mm:
     Rounded log diameter, mm


180-280

Feed rate, m/min

0 - 8

Number of cutters (top and bottom), pcs

2

Drive power, kW:
     Feed
     Cutter


1,5
2х22

Current

three phase, alternating

Current frequency, Hz

50

Voltage, V

380

Dimensions, mm:
     Length
     Width
     Heigth
     Weight, kg


1600
2000
1500
1000

675C lathe main units

Cutting unit

This unit processes the element from up and down to obtain a desired shape in accordance with the cutting chart.

Assembly and installation

The installed lathe should be easily accessible and well-lighted. The lathe is installed on a foundation with the depth depending on the ground type but no less than 600 mm and attached to the foundation by six 16 mm anchor bolts. After the installation onto the foundation the lathe is leveled. The level is mounted onto the foundation. Maximum allowable horizontal deviation is 0,2 mm along 1000 mm. The foundation is then cemented and consolidated; then the anchor bolts are tightened.

Additional information on 675C lathe

1. Warranty
The manufacturer provides a 1 year warranty for all equipment

2. Assembly and maintenance
All machines are equipped with cutting tools (excluding saws, as 675C can use saws of various manufacturers at the user's discretion. Saw specifications are listed in the Equipment Certificate). An additional agreement for commissioning and start-up may be concluded.

3. Moisture of raw materials
This machine is designed for processing of round softwood and hardwood trunks of 3rd grade and above as per GOST 9463-72; GOST 9462-71.

4. Spare parts
The Customer forwards an order for additional equipment or spare parts required, upon its receipt the Seller determines manufacture and delivery time.

5. Machine manufacture time
Machine manufacture time is within 1-1,5 months.

6. Payment terms
50% advance payment and 50% when the equipment is ready for shipment. 3% discount may be granted for 100% advance payment.

7. 675C approximate capacity
Using 0,72 utilization rate for calculation:
- Minimum: 830 running meters per shift;
- Average: 1 900 running meters per shift;
- Maximum: 2 765 running meters per shift.

8. Waste
Chips (after rounding, non-pulp - with bark),
Scrap (after smoothing),
Sawdust (after cutting).

9. Sawdust disposal
Two types of sawdust disposal depending on production facilities are considered (not included into machine price):
- scraping conveyor (preferable);
- pneumatic conveying.

10. Dimensions of materials processed
675C lathe is a feedthrough machine, so the maximum length of a log is of no importance. Minimum log length is 2000 mm.

The lathe is equipped with the following tools:

Lathe make Number of knives in a set
Rough knife Finishing knife
675C (smoothing) 4 4

Output variants for 675C integrated lathe for undersized trees processing:

Output sets include:
- 2 cutter housing assemblies;
- a set of knives;
- rollers for individual cutting layouts (half-blockhouses)

Cutting outfits may be custom-made.

Полусруб
Half-blockhouse